|
There are 2 types of phases, each of the phases for which are :-
- Single Phase
- 3-Phase
Make sure you check out the precaution note before install.
Installation Guide
Application for Single Phase
|

|
 |
Model: PT-01
For monthly consumption from 250 kWH - 1000 kWH, plug in 1 unit of Power.Tune Electricity Saver PT-01 into any independent 13Amp wall socket nearest to the ELCB / Distribution Channel. |
|
 |
Model : PT-02
For monthly consumption from 1000 kWH - 2000 kWH, plug in 1 unit of Power.Tune Electricity Saver PT-02 into any independent 13Amp wall socket nearest to the ELCB / Distribution Channel.
(For consumption between 900 - 1100 kWH, prefer to use PT-02)
|
|
|
PRECAUTION 1. Do not plug into an extension cord / mutiple socket. 2. You are advised to unplug the Power.Tune Electricity Saver ONLY when the LED indicator light is off.
|
Installation Guide
Application for 3-Phase
3-Phase requires 3 units, each phase one unit

|
Model: PT-01
For monthly consumption from 1000 kWH - 3000 kWH, plug in 1 unit of Power.Tune Electricity Saver PT-01 to each phase. |

|
|
Model: PT-02
For monthly consumption from 3000 kWH - 6000 kWH, plug in 1 unit of Power.Tune Electricity Saver PT-02 to each phase. |

|
|
Model: PT-02
For monthly consumption from 6000 kWH - 10000 kWH, plug in 2 units of Power.Tune Electricity Saver PT-02 to each phase. |

|
|
PRECAUTION For 3-Phase installation, in most cases, extra power points will be required from each phase (refer qualified electrician).
We recommend maximum of 10,000 kWH usage per month. For installation above 10,000kWH, kindly check with our Authorized Distributors.
|
|
|