|
FAQ
(Frequently Asked Questions)
Is the Power.Tune Electricity Saver
legal to use in Malaysia?
Yes, it is legal. Any changes to do before the Tenaga
meter reading are considered illegal. Power.Tune
Electricity Saver is installed after the Tenaga meter reading.
Will the Power.Tune Electricity
Saver unit definitely reduce my electricity bill?
The Power.Tune Electricity Saver unit will definitely
reduce your electricity bill. Based on customers’
feedback and extensive tests, savings up to 25%
have been recorded under normal conditions. The %
savings will depend upon the type of load and the
consumption. In some cases, savings above 30% have been
recorded, especially in shops, offices & Light
Industrial.
Why are you putting saving up to
25% and not 30%, 40% or even 45% that some other brand
of Electricity Saver says?
The % of saving are varies base on the electrical
appliances uses. We are putting a realistic figure of up to 25%, although some of our customers are
getting above 30% saving.
Some electrical appliances are
getting above 50% saving whereas some electrical appliances recorded 5% - 20%
saving. Average, most of our customers are getting 10% -
25% saving.
Is there any certification to prove
that it is safe to use?
Power.Tune
Electricity Saver has the most stringent safety, performance and reliability test conducted by international and local approving statutory bodies.
It
is technically compliant with the
EN61000-6-3, EN61000-3-2, EN61000-3-3 and EN61000-6-1
requirements.
Power.Tune
Electricity Saver has CE certification and has gone
through the following stringent tests :-
1.
Power
Line Conducted Emission Measurement
2.
Radiated
Emission Measurement
3.
Harmonic
Current Emission Measurement
4.
Voltage
Fluctuation and Flicker Measurement
5.
Electrostatic
Discharge Test
6.
RF
Field Strength Susceptibility Test
7.
Electrical
Fast Transient/Burst Immunity Test
8.
Surge
Immunity Test
9.
Injected
Currents Susceptibility Test
10. Voltage
Dips and Interruptions Test
Does the Power.Tune Electricity
Saver requires any maintenance?
No. Simply plug the Power.Tune Electricity Saver unit
on your premises and start saving money.
Do I need to make any changes to
the electrical wiring?
No. The Power.Tune Electricity Saver is designed as a
Plug n Saved device. Simply plug the unit into a 13Amp
socket on your premises & it should be plugged into
a wall socket, not an extension lead.
Which model of Power.Tune
Electricity Saver is suitable for my use?
There
are 2 models for Power.Tune, Please follow
the table below to choose the right model for you:-
|
Model
|
TNB Bill/Month
|
Kwh/Month
(Single phase)
|
3-Phase
|
|
PT-01
|
Less than RM300
|
Less than 1,000Kwh
|
Install 1 unit at each phase
for up to 3,000Kwh/month
|
|
PT-02
|
Between
RM300-RM1,000
|
1,000Kwh - 2,000Kwh
|
Install 1 unit at each phase for 3,000Kwh - 6,000Kwh/month
-----------------------------------------
Install 2 units at each phase for 6,000Kwh -
10,000Kwh/month
|
How long is the warranty period for
the Power.Tune Electricity Saver?
Power.Tune
Electricity Saver comes with a 12-month warranty,
covering any manufacturing or material defects.
What is the Return of Investment (ROI)
of buying the Power.Tune Electricity Saver?
Based on our customer feedback and field-testing, the
investment on the Power.Tune Electricity Saver can be
easily recovered within 6 months. Therefore, you will
enjoy additional savings for years to come.
Can I leave the Power.Tune
Electricity Saver Unit ‘switched-on’ continuously?
Yes. The Power.Tune Electricity Saver should be left
'Switched ON' continuously to achieve the maximum
savings. We recommend that the unit should be switched
off during long periods of inactivity, for example, when
going abroad on holiday, or if the premises are closed
for long periods of time.
Please note that the Power.Tune Electricity Saver
stores energy up to 3 seconds after it is switched off.
Please wait for at least 3 seconds after switching off
before un-plug or relocate the Power.Tune Electricity
Saver.
Can I put 2 units of Power.Tune
Electricity Saver for single phase to achieve higher %
of saving?
Under normal
circumstances, 1 unit is enough.
For model PT-01, 1 unit is enough for monthly usage of
below 1000kWH.
For model PT-02, 1 unit is enough for monthly usage up
to 2000kWH, however, if it is single phase and the usage
is above 2000kWH, you can install another unit of PT-02.
|